|
|
|
National Stock Number:
3040-01-222-3367
Federal Supply Class:
3040
National Item Identification Number:
012223367
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| BL-10445 | 08484 | BREEZE-EASTERN LLC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.2175 INCHES MINIMUM AND 0.2180 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.3146 INCHES MINIMUM AND 0.3150 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6709 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 9.625 INCHES NOMINAL | | SPECIAL FEATURES | BOTH ENDS CHAMFERED END 1-0.031 BY 45 DEG,END 2-0.015 BY 45 DEG,0.094 IN. DIA GROOVE IN STEP 3 | | SECOND END DIAMETER | 0.2492 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM | | SECOND END HOLE DIAMETER | 0.0620 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.109 INCHES NOMINAL | | SECOND END STYLE | UNTHREADED CROSS DRILLED | | STEP QUANTITY | 4 |
|
|