|
|
|
National Stock Number:
3040-01-220-9946
Federal Supply Class:
3040
National Item Identification Number:
012209946
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| BL-1147-1 | 08484 | BREEZE-EASTERN LLC |
|
Techincal Specification:
| OVERALL LENGTH | 5.468 INCHES NOMINAL | | SECOND END DIAMETER | 0.8720 INCHES MINIMUM AND 0.8780 INCHES MAXIMUM | | SECOND END STYLE | SPLINED (INVOLUTE) | | SECOND END PITCH DIAMETER | 0.6000 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 0.625 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.6900 INCHES MINIMUM AND 0.7000 INCHES MAXIMUM | | SECOND END SPLINE MINOR DIAMETER | 0.5500 INCHES MINIMUM AND 0.5530 INCHES MAXIMUM | | SECOND END SPLINE QUANTITY | 12 | | STEP QUANTITY | 4 | | END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.3744 INCHES MINIMUM AND 0.3749 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 1.250 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000,COND A MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 4340 | | PROPRIETARY CHARACTERISTICS | PACS |
|
|