|
|
|
National Stock Number:
3040-01-220-0965
Federal Supply Class:
3040
National Item Identification Number:
012200965
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 77656-31X5 | 96169 | ELECTRIC BOAT CORPORATION | | 77656-31X5 PIECE 8 | 96169 | ELECTRIC BOAT CORPORATION | | SSN637-505-2143923 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | SSN637-505-2143923 PIECE 8 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 0.7470 INCHES MINIMUM AND 0.7480 INCHES MAXIMUM | | FIRST END SPLINE LENGTH | 3.313 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 0.7470 INCHES MINIMUM AND 0.7480 INCHES MAXIMUM | | FIRST END SPLINE MINOR DIAMETER | 0.6340 INCHES MINIMUM AND 0.6350 INCHES MAXIMUM | | FIRST END SPLINE QUANTITY | 10 | | FIRST END STYLE | SPLINED (STRAIGHT) | | OVERALL LENGTH | 3.313 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-281,CLASS 1,CD FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | NICKEL ALLOY | | SPECIAL FEATURES | 2 DRILLED HOLES,FIRSTEND 0.2813 IN. DIA,SECOND END 0.2115 IN. DIA,BORED THROUGH SHAFT |
|
|