|
|
|
National Stock Number:
3040-01-220-0669
Federal Supply Class:
3040
National Item Identification Number:
012200669
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 7417W3P001 | 97424 | AMETEK INC | | 7417W83P001 | 97424 | AMETEK INC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.5000 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.500 INCHES NOMINAL | | OVERALL LENGTH | 1.380 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 CLASS 303 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SECOND END DISTANCE FROM END TO GROOVE | 0.097 INCHES NOMINAL | | SECOND END EXTERNAL THREAD LENGTH | 0.097 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.0750 INCHES NOMINAL | | SECOND END DIAMETER | 0.0934 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED AND EXTERNALLY THREADED | | SECOND END GROOVE WIDTH | 0.0190 INCHES NOMINAL | | SPECIAL FEATURES | THREE HOLES THRU FIRST END,THD 2-56UNC-2B EQUALLY SPACED ON 0.336 IN. BC DIA | | STEP QUANTITY | 3 |
|
|