|
|
|
National Stock Number:
3040-01-218-0006
Federal Supply Class:
3040
National Item Identification Number:
012180006
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 4 | 00607 | GAP INSTRUMENT CORP | | 4 | 07CR8 | ADVANCED LOGIC RESOURCES INC | | 4-25 | 00607 | GAP INSTRUMENT CORP | | 4-25 | 07CR8 | ADVANCED LOGIC RESOURCES INC |
|
Techincal Specification:
| ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 90.0 | | BORE DIAMETER | 0.2492 INCHES NOMINAL | | LARGEST DIAMETER LENGTH | 0.210 INCHES NOMINAL | | OUTSIDE DIAMETER | 0.438 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | SCREW THREAD SERIES DESIGNATOR AND LOCATION | ALL HOLES UNC | | SECURING HOLE QUANTITY | 2 | | SECURING HOLE TYPE AND LOCATION | THREADED ALL HOLES | | SMALL END DIAMETER | 0.312 INCHES NOMINAL | | STYLE DESIGNATOR | ROUND STEPPED | | SURFACE FINISH AND LOCATION | 125 MICROINCHES OVERALL | | THICKNESS | 0.220 INCHES NOMINAL |
|
|