|
|
|
National Stock Number:
3040-01-216-5813
Federal Supply Class:
3040
National Item Identification Number:
012165813
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 797-7480-001 | 13499 | ROCKWELL COLLINS, INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.2480 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM | | FIRST END DISTANCE FROM END TO GROOVE | 0.0620 INCHES MINIMUM AND 0.0720 INCHES MAXIMUM | | FIRST END GROOVE WIDTH | 0.0180 INCHES MINIMUM AND 0.0200 INCHES MAXIMUM | | FIRST END GROOVE DIAMETER | 0.0950 INCHES MINIMUM AND 0.0970 INCHES MAXIMUM | | FIRST END STYLE | CIRCULAR GROOVED | | LARGEST STEP DIAMETER | 0.2480 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM | | OVERALL LENGTH | 1.625 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764 COND A FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 303 | | SECOND END DIAMETER | 0.2480 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM | | SPECIAL FEATURES | END WITH LARGEST DIA HAS BOTH SIDES FLATTENED DIMENSIONS ARE 0.185 PORM0.001 IN. | | STEP QUANTITY | 4 |
|
|