|
|
|
National Stock Number:
3040-01-216-4110
Federal Supply Class:
3040
National Item Identification Number:
012164110
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 35-79501-1102-2 | 59211 | PARKER-HANNIFIN CORPORATION | | 35-79501-1102-2 | 86329 | PARKER-HANNIFIN CORP |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 8620 NATIONAL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 8620 | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 3.312 INCHES NOMINAL | | SECOND END DIAMETER | 0.3750 INCHES NOMINAL | | SECOND END HOLE DEPTH | 0.3750 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.0795 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.120 INCHES NOMINAL | | SECOND END EXTERNAL THREAD LENGTH | 0.317 INCHES NOMINAL | | SECOND END STYLE | CROSS DRILLED AND EXTERNALLY THREADED | | STEP QUANTITY | 4 | | SURFACE FINISH | 8.0 MICROINCHES |
|
|