3040-01-213-5570, SHAFT,SHOULDERED

National Stock Number:
3040-01-213-5570

Federal Supply Class:
3040

National Item Identification Number:
012135570

Description:
SHAFT,SHOULDERED

Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Manufacturer Information:

3171936-1

59364

HONEYWELL INTERNATIONAL INC.

Techincal Specification:

END SIMILARITY	NOT IDENTICAL
FIRST END DIAMETER	0.2481 INCHES MINIMUM AND 0.2490 INCHES MAXIMUM
FIRST END DISTANCE FROM END TO FLAT	0.340 INCHES MINIMUM AND 0.350 INCHES MAXIMUM
FIRST END GROOVE WIDTH	0.0940 INCHES MINIMUM AND 0.1040 INCHES MAXIMUM
FIRST END GROOVED FLAT DEPTH	0.0331 INCHES MINIMUM AND 0.0340 INCHES MAXIMUM
FIRST END GROOVED FLAT LENGTH	0.2600 INCHES MINIMUM AND 0.2800 INCHES MAXIMUM
FIRST END HOLE DEPTH	0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM
FIRST END HOLE DIAMETER	0.1630 INCHES MINIMUM AND 0.1720 INCHES MAXIMUM
FIRST END DISTANCE FROM END TO GROOVE	0.976 INCHES MINIMUM AND 1.116 INCHES MAXIMUM
FIRST END DISTANCE FROM HOLE CENTER TO END	1.8120 INCHES MINIMUM AND 1.8420 INCHES MAXIMUM
FIRST END GROOVE DIAMETER	0.1360 INCHES MINIMUM AND 0.1380 INCHES MAXIMUM
LARGEST STEP DIAMETER	0.499 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
OVERALL LENGTH	7.880 INCHES MINIMUM AND 7.910 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OR AMS 5646 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL	STEEL COMP 347
SECOND END ANGLE BETWEEN HOLES	57.0 DEGREES NOMINAL
SECOND END DIAMETER	0.4991 INCHES MINIMUM AND 0.4996 INCHES MAXIMUM
SECOND END HOLE DEPTH	0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM
SECOND END HOLE DIAMETER	0.1630 INCHES MINIMUM AND 0.1720 INCHES MAXIMUM
SECOND END DISTANCE FROM HOLE CENTER TO END	3.100 INCHES NOMINAL
SPECIAL FEATURES	BOTH ENDS DRILLED AND COUNTERSUNK AXIALLY
STEP QUANTITY	3
SURFACE FINISH	32.0 MICROINCHES

Click here to Register for Free 30-day Trial