5999-01-210-8178 CIRCUIT CARD ASSEMBLY Index 6645-01-210-8180 METER,TIME TOTALIZING

National Stock Number:
3040-01-210-8179

Federal Supply Class:
3040

National Item Identification Number:
012108179

Description:
SHAFT,STRAIGHT

Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.


Manufacturer Information:
1055393219200US ARMY ARDEC RDECOM


Techincal Specification:
END SIMILARITYNOT IDENTICAL
FIRST END DIAMETER0.6242 INCHES MINIMUM AND 0.6247 INCHES MAXIMUM
FIRST END DISTANCE FROM END TO GROOVE0.344 INCHES NOMINAL
FIRST END GROOVE DIAMETER0.4450 INCHES MINIMUM AND 0.4470 INCHES MAXIMUM
FIRST END GROOVE WIDTH0.1410 INCHES MINIMUM AND 0.1510 INCHES MAXIMUM
FIRST END STYLECIRCULAR GROOVED
OVERALL LENGTH1.650 INCHES MINIMUM AND 1.660 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE
MATERIALSTEEL COMP 303 OR STEEL COMP 303SE
SPECIAL FEATURESFINISH IS CLEANING,PASSIVATION,AND PRETREATMENT COATING. CLEAN AND PASSIVATE,QQ-P-35. APPLY FINISH,PRETREATMENT COATING,TT-C-490,TYPE 3 (WASH PRIMER).SURFACES MARKED "X" FINISH IS TT-P-636 OR TT-P-664.TOPCOAT IS TT-E-489.BAKE PRIMER AND TOPCOAT. COLOR GRAY NO 16187 OF FED-STD-595
SURFACE FINISH32.00 MICROINCHES


Click here to Register for Free 30-day Trial