|
|
|
National Stock Number:
3040-01-208-7853
Federal Supply Class:
3040
National Item Identification Number:
012087853
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 753385-3 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 1.042 INCHES NOMINAL | | FIRST END DIAMETER | 0.5625 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.4680 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.7620 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED AND EXTERNALLY THREADED | | LARGEST STEP DIAMETER | 0.815 INCHES MINIMUM AND 0.820 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 12.820 INCHES NOMINAL | | STEP QUANTITY | 5 |
|
|