|
|
|
National Stock Number:
3040-01-207-9630
Federal Supply Class:
3040
National Item Identification Number:
012079630
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 11046-F-18 | 88032 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 11046-F-18 ITEM 10 | 0UBG9 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 11046-F-18 ITEM 10 | 88032 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 55-22252-15 | 52081 | EURAMCO SAFETY INC | | D4X11S10X1 | 0UBG9 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | D4X11S10X1 | 88032 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | PL-11046-F-18 | 88032 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | PL-11046-F-18 ITEM 10 | 0UBG9 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | PL-11046-F-18 ITEM 10 | 88032 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION |
|
Techincal Specification:
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-281 CLASS A FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | NICKEL ALLOY |
|
|