|
|
|
National Stock Number:
3040-01-204-1761
Federal Supply Class:
3040
National Item Identification Number:
012041761
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 12524A1 | 42223 | MYERS F E CO SUB OF PENTAIR CORP |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END EXTERNAL THREAD LENGTH | 0.400 INCHES NOMINAL | | FIRST END DIAMETER | 0.5000 INCHES NOMINAL | | FIRST END STYLE | EXTERNAL THREADED | | LARGEST STEP DIAMETER | 1.125 INCHES NOMINAL | | MATERIAL | STEEL COMP 416F | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 2.843 INCHES NOMINAL | | SECOND END DIAMETER | 1.1250 INCHES NOMINAL | | SECOND END DISTANCE BETWEEN HOLE CENTERS | 0.281 INCHES NOMINAL | | SECOND END ANGLE BETWEEN HOLES | 90.0 DEGREES NOMINAL | | SECOND END HOLE DEPTH | 0.250 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.3120 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.453 INCHES NOMINAL | | SECOND END STYLE | TWO CROSS DRILLED HOLES | | SPECIAL FEATURES | WITH SET SCREW ASSY | | STEP QUANTITY | 3 |
|
|