|
|
|
National Stock Number:
3040-01-202-9073
Federal Supply Class:
3040
National Item Identification Number:
012029073
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 3598-048 | 66503 | WOODWARD, INC. |
|
Techincal Specification:
| FIRST END STYLE | CIRCULAR GROOVED AND SPLINED (STRAIGHT) | | LARGEST STEP DIAMETER | 0.2490 INCHES MINIMUM AND 0.2493 INCHES MAXIMUM | | OVERALL LENGTH | 3.484 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5613 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 410 | | SPECIAL FEATURES | HARDENED 28-35RC; HOLE 0.0937 - 0.0960 IN. DIA,0.229 IN. MAX DP,0.0937 - 0.0952 IN. HEX 0.146 IN. MIN DP; PART OF RESTORING ASSY 5354-090 | | STEP QUANTITY | 10 |
|
|