|
|
|
National Stock Number:
3040-01-200-7097
Federal Supply Class:
3040
National Item Identification Number:
012007097
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 3500959-2 | 59364 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.0955 INCHES MINIMUM AND 0.0965 INCHES MAXIMUM | | FIRST END PITCH DIAMETER | 0.0015 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 45.0 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 0.154 INCHES MINIMUM AND 0.214 INCHES MAXIMUM | | FIRST END SPLINE MAJOR DIAMETER | 0.1855 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM | | FIRST END SPLINE MINOR DIAMETER | 0.1699 INCHES MINIMUM AND 0.1719 INCHES MAXIMUM | | FIRST END SPLINE QUANTITY | 23 | | FIRST END STYLE | SPLINED (INVOLUTE) | | LARGEST STEP DIAMETER | 0.215 INCHES MINIMUM AND 0.217 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6485 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 1.360 INCHES MINIMUM AND 1.380 INCHES MAXIMUM | | SECOND END DIAMETER | 0.2150 INCHES MINIMUM AND 0.2170 INCHES MAXIMUM | | SECOND END HOLE DIAMETER | 0.1623 INCHES MINIMUM AND 0.1628 INCHES MAXIMUM | | SECOND END DISTANCE FROM HOLE CENTER TO END | 1.230 INCHES NOMINAL | | SECOND END STYLE | UNTHREADED CROSS DRILLED | | SPECIAL FEATURES | HOLE 0.080 IN. DIA,SECOND END,CENTERED ON CENTRAL AXIS | | STEP QUANTITY | 2 | | SURFACE FINISH | 32.0 MICROINCHES |
|
|