|
|
|
National Stock Number:
3040-01-199-7951
Federal Supply Class:
3040
National Item Identification Number:
011997951
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 2CD719 | 45152 | OSHKOSH CORP | | 2CD719 | 75Q65 | OSHKOSH DEFENSE LLC | | 6-810-001897 | 076M6 | BAE SYSTEMS LAND & ARMAMENTS L.P. | | 6-810-001897 | 0FW39 | BAE SYSTEMS TACTICAL VEHICLE SYSTEMS LP | | 6-810-001897 | 12361 | GROVE U.S. LLC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.6692 INCHES MINIMUM AND 0.6695 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.875 INCHES NOMINAL | | MATERIAL | STEEL COMP 8620 | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 12.144 INCHES NOMINAL | | SECOND END DIAMETER | 0.8750 INCHES NOMINAL | | SECOND END STYLE | SPLINED (INVOLUTE) | | SECOND END PITCH DIAMETER | 0.8125 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 2.550 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.8540 INCHES MINIMUM AND 0.8590 INCHES MAXIMUM | | SECOND END SPLINE MINOR DIAMETER | 0.7230 INCHES MINIMUM AND 0.7340 INCHES MAXIMUM | | SECOND END SPLINE QUANTITY | 13 | | STEP QUANTITY | 2 | | SURFACE FINISH | 32.0 MICROINCHES |
|
|