|
|
|
National Stock Number:
3040-01-199-7336
Federal Supply Class:
3040
National Item Identification Number:
011997336
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 9529M24P01 | 07482 | GENERAL ELECTRIC COMPANY | | 9529M24P01 | 11371 | BMT AEROSPACE USA, INC. | | 9529M24P01 | 21540 | PRECISION GEAR INDUSTRIES LLC | | 9529M24P01 | 57152 | TRIUMPH GEAR SYSTEMS - MACOMB, INC | | 9529M24P01 | 62662 | BMT AEROSPACE USA, INC |
|
Techincal Specification:
| CRITICALITY CODE JUSTIFICATION | AGAV | | END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.4475 INCHES NOMINAL | | FIRST END PITCH DIAMETER | 1.4000 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 0.650 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 1.4475 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 1.2900 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 28 | | FIRST END STYLE | SPLINED (INVOLUTE) | | LARGEST STEP DIAMETER | 1.9145 INCHES NOMINAL | | OVERALL LENGTH | 4.640 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6709 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SECOND END DIAMETER | 1.9145 INCHES NOMINAL | | SECOND END SPLINE LENGTH | 1.010 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 1.9145 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 1.6800 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 22 | | SECOND END STYLE | SPLINED (INVOLUTE) | | SECOND END PITCH DIAMETER | 1.8333 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 25.0 DEGREES NOMINAL | | SPECIAL FEATURES | FIRST END OMIT ONE TOOTH; SECOND END FORM DOUBLE TOOTH | | STEP QUANTITY | 8 |
|
|