|
|
|
National Stock Number:
3040-01-199-4635
Federal Supply Class:
3040
National Item Identification Number:
011994635
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 462-5562235 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 5562235-308 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.8750 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 1.875 INCHES NOMINAL | | OVERALL LENGTH | 4.125 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-286,CLASS A,FORM 1 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | NICKEL ALLOY | | SECOND END EXTERNAL KEYWAY LENGTH | 1.250 INCHES NOMINAL | | SECOND END ANGLE BETWEEN KEYWAYS | 180.0 DEGREES NOMINAL | | SECOND END DIAMETER | 1.1250 INCHES NOMINAL | | SECOND END STYLE | TWO FLAT KEYWAYS | | SECOND END KEYWAY DEPTH | 0.211 INCHES NOMINAL | | SECOND END KEYWAY WIDTH | 0.3760 INCHES NOMINAL | | STEP QUANTITY | 3 |
|
|