|
|
|
National Stock Number:
3040-01-168-0812
Federal Supply Class:
3040
National Item Identification Number:
011680812
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 65015121-000 | 96238 | DNE TECHNOLOGIES, INC |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.100 INCHES NOMINAL | | FIRST END DIAMETER | 0.2480 INCHES MINIMUM AND 0.2490 INCHES MAXIMUM | | FIRST END GROOVE DIAMETER | 0.2280 INCHES MINIMUM AND 0.2310 INCHES MAXIMUM | | FIRST END GROOVE WIDTH | 0.0290 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM | | FIRST END STYLE | CIRCULAR GROOVED | | FSC APPLICATION DATA | TELETYPE AND FACSIMILE EQUIPMENT | | LARGEST STEP DIAMETER | 0.371 INCHES NOMINAL | | OVERALL LENGTH | 1.970 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END GROOVE DIAMETER | 0.2000 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.0300 INCHES NOMINAL | | SECOND END DIAMETER | 0.6200 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.190 INCHES NOMINAL | | STEP QUANTITY | 3 |
|
|