|
|
|
National Stock Number:
3040-01-167-7076
Federal Supply Class:
3040
National Item Identification Number:
011677076
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 726-225-001 | 26055 | PARKER-HANNIFIN CORPORATION | | 726-225-001 | 59211 | PARKER-HANNIFIN CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.1235 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.187 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 303 | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 1.160 INCHES NOMINAL | | SPECIAL FEATURES | BOTH ENDS PARTIAL BORE;FIRST END 0.087 IN. DIA,0.090 IN. DP;SECOND END 0.053 IN. DIA,0.062 IN. DP | | SECOND END DISTANCE FROM END TO GROOVE | 0.189 INCHES NOMINAL | | SECOND END DIAMETER | 0.0925 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.0190 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.0750 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED | | STEP QUANTITY | 3 | | SURFACE FINISH | 32.0 MICROINCHES |
|
|