|
|
|
National Stock Number:
3040-01-167-5402
Federal Supply Class:
3040
National Item Identification Number:
011675402
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 726-229-001 | 26055 | PARKER-HANNIFIN CORPORATION | | 726-229-001 | 59211 | PARKER-HANNIFIN CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.050 INCHES NOMINAL | | FIRST END DIAMETER | 0.0935 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.0750 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.0190 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED | | LARGEST STEP DIAMETER | 0.375 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 303 | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 1.099 INCHES NOMINAL | | SECOND END DIAMETER | 0.3123 INCHES NOMINAL | | SECOND END INTERNAL THREAD LENGTH | 0.280 INCHES NOMINAL | | SECOND END STYLE | INTERNAL THREADED | | SPECIAL FEATURES | SECOND END HAS PARTIAL BORE NO.4 TAP,0.420 IN. DP | | STEP QUANTITY | 4 | | SURFACE FINISH | 32.0 MICROINCHES |
|
|