2530-01-166-8293 BRAKE SHOE Index 4820-01-166-8295 PARTS KIT,SAFETY RELIEF VALVE

National Stock Number:
3040-01-166-8294

Federal Supply Class:
3040

National Item Identification Number:
011668294

Description:
SHAFT,SHOULDERED

Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.


Manufacturer Information:
161215010001NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER


Techincal Specification:
END SIMILARITYNOT IDENTICAL
FIRST END DIAMETER0.8666 INCHES NOMINAL
FIRST END PITCH DIAMETER0.8333 INCHES NOMINAL
FIRST END PRESSURE ANGLE30.0 DEGREES NOMINAL
FIRST END SPLINE LENGTH1.468 INCHES NOMINAL
FIRST END SPLINE MAJOR DIAMETER0.8666 INCHES NOMINAL
FIRST END SPLINE MINOR DIAMETER0.7793 INCHES NOMINAL
FIRST END SPLINE QUANTITY20
FIRST END STYLESPLINED (INVOLUTE)
LARGEST STEP DIAMETER1.625 INCHES NOMINAL
OVERALL LENGTH11.625 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-624,TYPE D,GRADE 2 FED SPEC SINGLE MATERIAL RESPONSE
MATERIALSTEEL COMP 8650
SECOND END EXTERNAL KEYWAY LENGTH0.750 INCHES NOMINAL
SECOND END EXTERNAL THREAD LENGTH0.406 INCHES NOMINAL
SECOND END GROOVE DIAMETER1.0620 INCHES NOMINAL
SECOND END GROOVE WIDTH0.1250 INCHES NOMINAL
SECOND END DIAMETER1.1730 INCHES NOMINAL
SECOND END DISTANCE FROM END TO GROOVE0.406 INCHES NOMINAL
SECOND END STYLECIRCULAR GROOVED FLAT KEYWAY AND EXTERNALLY THREADED
SECOND END KEYWAY DEPTH0.093 INCHES NOMINAL
SECOND END KEYWAY WIDTH0.1870 INCHES NOMINAL
SPECIAL FEATURESFIRST END CIRCULAR GROOVED,0.046 IN. GROOVE W,0.821 IN. DIA,1.391 IN. DISTANCE FROM END TO GROOVE;SECOND END PARTIAL BORE,0.316 IN. DIA,1.187 IN. DP;SECOND END INTERNAL THD,0.937 IN. LG
STEP QUANTITY8
SURFACE FINISH8.0 MICROINCHES


Click here to Register for Free 30-day Trial