|
|
|
National Stock Number:
3040-01-164-7818
Federal Supply Class:
3040
National Item Identification Number:
011647818
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 145531 | 79318 | MEGGITT NORTH HOLLYWOOD INC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.902 INCHES NOMINAL | | FIRST END DIAMETER | 0.5615 INCHES NOMINAL | | FIRST END HOLE DIAMETER | 0.1260 INCHES NOMINAL | | FIRST END STYLE | UNTHREADED CROSS DRILLED | | LARGEST STEP DIAMETER | 0.623 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 17-4PH | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 3.245 INCHES NOMINAL | | SECOND END DIAMETER | 0.3725 INCHES NOMINAL | | SECOND END ANGLE BETWEEN FLATS | 180.0 DEGREES NOMINAL | | SECOND END STYLE | TWO FLATS | | SECOND END STEP LENGTH | 1.082 INCHES NOMINAL | | SPECIAL FEATURES | SECOND END INTERNALLY THREADED,0.650 IN. DP | | STEP QUANTITY | 3 | | SURFACE FINISH | 16.0 MICROINCHES |
|
|