|
|
|
National Stock Number:
3040-01-161-4805
Federal Supply Class:
3040
National Item Identification Number:
011614805
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 731816 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.6830 INCHES NOMINAL | | FIRST END PITCH DIAMETER | 0.4750 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 0.500 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 0.5200 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 0.4500 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 19 | | FIRST END STYLE | SPLINED (INVOLUTE) | | LARGEST STEP DIAMETER | 0.812 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6265 ASSN STD ALL MATERIAL RESPONSES | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 3.304 INCHES NOMINAL | | SECOND END DIAMETER | 1.1940 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.0750 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.3190 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 1.0580 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED | | SPECIAL FEATURES | EXTERNAL INVOLUTE SPLINE 1.784 IN. FROM 2ND END;0.781 IN. LG;0.875 IN. APPROX. DIA.;36 TEETH;0.900 IN. P.D. | | STEP QUANTITY | 3 |
|
|