|
|
|
National Stock Number:
3040-01-159-5838
Federal Supply Class:
3040
National Item Identification Number:
011595838
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 10-1732 PIECE 25 | 28199 | L3 TECHNOLOGIES, INC. | | A-12996 | 28199 | L3 TECHNOLOGIES, INC. | | A-12996-I | 28199 | L3 TECHNOLOGIES, INC. |
|
Techincal Specification:
| SECOND END STYLE | CIRCULAR GROOVED | | SPECIAL FEATURES | FIRST END 0.094 IN. DRILLED HOLE AT ASSY | | STEP QUANTITY | 3 | | END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.3115 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.500 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 0.625 INCHES NOMINAL | | SECOND END DIAMETER | 0.3120 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.050 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.0295 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.2900 INCHES NOMINAL |
|
|