|
|
|
National Stock Number:
3040-01-158-1567
Federal Supply Class:
3040
National Item Identification Number:
011581567
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 10106955 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 74A620042-2003 | 76301 | THE BOEING COMPANY | | 74A620042-2005 | 3T475 | TRW INC TRW INFORMATION SERVICES GROUP CUSTOMER SERVICE DIV | | 74A620042-2005 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.177 INCHES NOMINAL | | FIRST END EXTERNAL THREAD LENGTH | 0.800 INCHES NOMINAL | | FIRST END DIAMETER | 0.2500 INCHES NOMINAL | | FIRST END HOLE DEPTH | 0.250 INCHES NOMINAL | | FIRST END HOLE DIAMETER | 0.0760 INCHES MINIMUM AND 0.0810 INCHES MAXIMUM | | FIRST END STYLE | CROSS DRILLED AND EXTERNALLY THREADED | | FSC APPLICATION DATA | SENSOR ASSEMBLY,LATERAL STICK POSITION | | LARGEST STEP DIAMETER | 0.590 INCHES NOMINAL | | OVERALL LENGTH | 8.086 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS-5643 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 17-4PH | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.312 INCHES NOMINAL | | SECOND END DIAMETER | 0.5900 INCHES NOMINAL | | SECOND END STYLE | CROSS DRILLED HOLE AND INTERNALLY THREADED | | SECOND END HOLE DEPTH | 0.502 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.0700 INCHES NOMINAL | | SECOND END INTERNAL THREAD LENGTH | 0.950 INCHES NOMINAL | | STEP QUANTITY | 4 | | SURFACE FINISH | 32.0 MICROINCHES |
|
|