|
|
|
National Stock Number:
3040-01-157-6400
Federal Supply Class:
3040
National Item Identification Number:
011576400
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 2498049 | 3H889 | PARKER-HANNIFIN CORPORATION | | 2498049 | 92003 | PARKER HANNIFIN CORPORATION DIV AEROSPACE GROUP HEADQUARTERS | | 2498049 | 99551 | GOODRICH CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.0700 INCHES MINIMUM AND 0.0800 INCHES MAXIMUM | | FIRST END DIAMETER | 0.1850 INCHES MINIMUM AND 0.1950 INCHES MAXIMUM | | FIRST END GROOVE DIAMETER | 0.1740 INCHES MINIMUM AND 0.1760 INCHES MAXIMUM | | FIRST END GROOVE WIDTH | 0.0180 INCHES MINIMUM AND 0.0200 INCHES MAXIMUM | | FIRST END STYLE | CIRCULAR GROOVED | | LARGEST STEP DIAMETER | 0.620 INCHES MINIMUM AND 0.640 INCHES MAXIMUM | | OVERALL LENGTH | 3.870 INCHES MINIMUM AND 3.890 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6415 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SECOND END EXTERNAL KEYWAY LENGTH | 0.060 INCHES NOMINAL | | SECOND END EXTERNAL THREAD LENGTH | 0.3750 INCHES NOMINAL | | SECOND END DIAMETER | 0.4340 INCHES MINIMUM AND 0.4360 INCHES MAXIMUM | | SECOND END STYLE | EXTERNALLY THREADED AND FLAT KEYWAY | | SECOND END KEYWAY DEPTH | 0.080 INCHES NOMINAL | | SECOND END KEYWAY WIDTH | 0.1100 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM | | STEP QUANTITY | 5 | | SPECIAL FEATURES | RETURN SPRING SHAFT; SECOND END DRILLED 0.060 - 0.065 IN. DIA,1.54 - 1.57 IN. DP TO AN ADJACENT DRILL THRU 0.060 - 0.065 IN. DIA | | SURFACE FINISH | 16.0 MICROINCHES |
|
|