|
|
|
National Stock Number:
3040-01-084-3390
Federal Supply Class:
3040
National Item Identification Number:
010843390
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 10683 | 54402 | RPS-FL, INC. | | 55-22018-15 | 52081 | EURAMCO SAFETY INC | | 55-22018-15A | 52081 | EURAMCO SAFETY INC | | 945880-00 | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 945880-1PH | 0UBG9 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 945880-1PH | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 945880PH | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | MMI-945880PH | 0C1K2 | SOUTHPORT MACHINE INC | | RY-145880 | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION |
|
Techincal Specification:
| LARGEST STEP DIAMETER | 1.375 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-281 CLASS A FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | NICKEL ALLOY | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 29.250 INCHES NOMINAL | | SPECIAL FEATURES | KEYWAY MEASURED AT 1.062 DIA. | | STEP QUANTITY | 9 |
|
|