|
|
|
National Stock Number:
3040-01-074-0604
Federal Supply Class:
3040
National Item Identification Number:
010740604
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| S33288-12 | 73830 | GERSTENLAGER CO THE |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.5000 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.0560 INCHES NOMINAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.125 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.4350 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED | | OVERALL LENGTH | 5.750 INCHES NOMINAL | | LARGEST STEP DIAMETER | 1.125 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | SECOND END DIAMETER | 0.7500 INCHES NOMINAL | | SPECIAL FEATURES | 0.25IN DP KEYWAY 1ST STEP,0.625IN DIA HOLE 1.5IN DP 2ND END | | STEP QUANTITY | 3 |
|
|