| DESIGN CHARACTERISTICS | SINGLE ACTING SINGLE CYLINDER |
| BODY MATERIAL | STEEL |
| BORE DIAMETER | 1.125 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS | 0.625 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
| COMPRESSED LENGTH | 5.125 INCHES NOMINAL |
| EXTENDED LENGTH | 8.125 INCHES NOMINAL |
| FIRST END EXTERNAL THREAD LENGTH | 0.750 INCHES NOMINAL ALL WORKING ENDS |
| FIRST END OUTSIDE DIAMETER | 0.375 INCHES NOMINAL ALL WORKING ENDS |
| FIRST PISTON ROD END STYLE | EXTERNAL THREADED ALL WORKING ENDS |
| FIRST PISTON ROD END THREAD CLASS | 2A ALL WORKING ENDS |
| FIRST PISTON ROD END THREAD DIAMETER | 0.375 INCHES NOMINAL ALL WORKING ENDS |
| FIRST PISTON ROD END THREAD DIRECTION | RIGHT-HAND ALL WORKING ENDS |
| FIRST PISTON ROD END THREAD QUANTITY PER INCH | 24 ALL WORKING ENDS |
| FIRST PISTON ROD END THREAD SERIES DESIGNATOR | UNF ALL WORKING ENDS |
| INTEGRAL VALVE OPERATION METHOD | PNEUMATIC |
| PORT LOCATION AND QUANTITY | 1 CYLINDER HEAD END AND 1 PISTON ROD END |
| PORT NOMINAL PIPE THREAD SIZE | 0.125 INCHES ALL PORTS |
| PORT STYLE | GASKET SEAL ALL PORTS |
| PORT THREAD SERIES DESIGNATOR | NPT ALL PORTS |
| PRESSURE RATING | 200.0 POUNDS PER SQUARE INCH MAXIMUM |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING FACILITY THREAD CLASS | 2A |
| MOUNTING FACILITY THREAD DIAMETER | 0.190 INCHES NOMINAL |
| MOUNTING FACILITY THREAD DIRECTION | RIGHT-HAND |
| MOUNTING FACILITY THREAD LENGTH | 0.190 INCHES NOMINAL |
| MOUNTING FACILITY THREAD QUANTITY PER INCH | 32 |
| MOUNTING FACILITY THREAD SERIES DESIGNATOR | UNF |
| MOUNTING PROVISION ARRANGEMENT STYLE | TWO HOLE |
| MOUNTING PROVISION | THREADED MOUNTING HOLES |
| OVERALL HEIGHT | 1.500 INCHES NOMINAL |
| OVERALL WIDTH | 1.500 INCHES NOMINAL |
| SPECIAL FEATURES | ADDITIONAL THD MTG HOLES LOCATED EACH END,TWO ON CYLINDER HEAD END,ONE ON PISTON ROD END,4.750 IN. LONGEST HORIZONTAL DISTANCE BETWEEN MTG CENTERS,1.000 IN. CENTERS BETWEEN HOLES ON CYLINDER HEAD END,0.190-32 UNF THD SIZE |
| TEMP RATING | 130.0 DEG FAHRENHEIT |