|
|
|
National Stock Number:
3040-01-064-8149
Federal Supply Class:
3040
National Item Identification Number:
010648149
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| HS070D2121-11 | 57230 | GOULD INC SIMULATION SYSTEMS DIV |
|
Techincal Specification:
| ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 90.0 | | BORE DIAMETER | 0.1260 INCHES NOMINAL | | HOLE DIAMETER AND LOCATION | 0.0860 INCHES NOMINAL ALL HOLES | | LARGEST DIAMETER LENGTH | 0.203 INCHES NOMINAL | | OUTSIDE DIAMETER | 0.422 INCHES NOMINAL | | MATERIAL | PLASTIC | | NOMINAL THREAD SIZE AND LOCATION | 0.086 INCHES ALL HOLES | | SMALL END DIAMETER | 0.245 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH AND LOCATION | 56 ALL HOLES | | SCREW THREAD SERIES DESIGNATOR AND LOCATION | ALL HOLES UNC | | SECURING HOLE QUANTITY | 2 | | SECURING HOLE TYPE AND LOCATION | THREADED ALL HOLES | | STYLE DESIGNATOR | ROUND STEPPED | | THICKNESS | 0.328 INCHES NOMINAL |
|
|