|
|
|
National Stock Number:
3040-01-063-7711
Federal Supply Class:
3040
National Item Identification Number:
010637711
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 12266580 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 12266580 | 20418 | DRS SUSTAINMENT SYSTEMS, INC. USE CAGE CODE 98255 FOR CATALOGING | | 6695-613 | 11871 | RECON/OPTICAL, INC. | | 6695-613 | 80294 | BOURNS INSTRUMENTS INC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.9995 INCHES MINIMUM AND 0.9997 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 1.125 INCHES NOMINAL | | OVERALL LENGTH | 6.420 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | SECOND END HOLE DEPTH | 0.375 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.1380 INCHES NOMINAL | | SECOND END DIAMETER | 0.9995 INCHES MINIMUM AND 0.9997 INCHES MAXIMUM | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.745 INCHES NOMINAL | | SECOND END STYLE | UNTHREADED CROSS DRILLED | | STEP QUANTITY | 8 | | SURFACE FINISH | 125.0 MICROINCHES |
|
|