|
|
|
National Stock Number:
3040-01-062-3137
Federal Supply Class:
3040
National Item Identification Number:
010623137
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 165-01/83059 | C5393 | HENSOLDT OPTRONICS GMBH | | 165-01/83059 | D3777 | ELTRO GMBH GESELLSCHAFT FUER STRAHLUNGSTECHNIK | | 2479517 | 99551 | GOODRICH CORPORATION | | 507064-11 | 96214 | RAYTHEON COMPANY | | SM-C-773350 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR | | SM-C-773472-4 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.0850 INCHES NOMINAL | | FIRST END DIAMETER | 0.4374 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.4170 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.1350 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED | | FSC APPLICATION DATA | NIGHT VISION EQUIPMENT | | LARGEST STEP DIAMETER | 0.4374 INCHES NOMINAL | | OVERALL LENGTH | 0.600 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 410 ASSN STD SINGLE MATERIAL RESPONSE AND AISI 420 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | SPECIAL FEATURES | 0.010 IN. BY 45 DEG CHAMFER ON ENDS | | STEP QUANTITY | 7 |
|
|