|
|
|
National Stock Number:
3040-01-058-9054
Federal Supply Class:
3040
National Item Identification Number:
010589054
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 5003319 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.6000 INCHES NOMINAL | | FIRST END SPLINE LENGTH | 0.5620 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 0.6000 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 0.4500 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 11 | | FIRST END STYLE | SPLINED (STRAIGHT) | | LARGEST STEP DIAMETER | 1.594 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 4.012 INCHES NOMINAL | | SECOND END DIAMETER | 0.8500 INCHES NOMINAL | | SECOND END STYLE | SPLINED (STRAIGHT) | | SECOND END SPLINE LENGTH | 0.5450 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.8500 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 0.6920 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 16 | | SPECIAL FEATURES | 1ST END BORED AND COUNTERSUNK 0.325 IN. DIA BY 0.435 IN. DP; 2ND END BORED AND COUNTERSUNK 0.410 IN. DIA BY 1.250 IN. DP; 2ND END 2ND STEP 4 HOLES 0.050 IN. DIA EQUALLY SPACED DRILLED THRU | | STEP QUANTITY | 7 | | SURFACE FINISH | 16.0 MICROINCHES |
|
|