|
|
|
National Stock Number:
3040-01-058-5187
Federal Supply Class:
3040
National Item Identification Number:
010585187
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 5003580 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.0780 INCHES NOMINAL | | FIRST END DIAMETER | 0.9840 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.9410 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.0420 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED | | LARGEST STEP DIAMETER | 1.156 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 1.948 INCHES NOMINAL | | SECOND END DIAMETER | 0.4250 INCHES NOMINAL | | SECOND END STYLE | SPLINED (STRAIGHT) | | SECOND END SPLINE LENGTH | 0.4060 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.4250 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 0.3500 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 16 | | SPECIAL FEATURES | FIRST END INTERNALLY SPLINED,12 TEETH,0.550 IN. MIN DIA,0.690 IN. MAJOR DIA; 2ND END AND END BORE OF FIRST END DRILLED 0.188 IN. DIA WITH COUNTER BORE | | STEP QUANTITY | 4 |
|
|