|
|
|
National Stock Number:
3040-01-056-9904
Federal Supply Class:
3040
National Item Identification Number:
010569904
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 5002659 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.1250 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.2980 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 1.909 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 3.022 INCHES NOMINAL | | SECOND END DIAMETER | 1.8900 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.0780 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 1.7910 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.2980 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED | | SPECIAL FEATURES | FIRST END SHAFT BORE INTERNALLY SPLINED 0.800 IN. MIN DIA,0.940 IN. MAJOR DIA; 2ND END SHAFT BORE INTERNALLY SPLINED 1.330 IN. MIN DIA,1.90 IN. MAJOR DIAMETER | | STEP QUANTITY | 7 | | SURFACE FINISH | 32.0 MICROINCHES |
|
|