|
|
|
National Stock Number:
3040-01-051-3070
Federal Supply Class:
3040
National Item Identification Number:
010513070
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 102-1416-01 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.3280 INCHES MINIMUM AND 0.3300 INCHES MAXIMUM | | FIRST END SPLINE LENGTH | 0.7500 INCHES MINIMUM AND 0.8000 INCHES MAXIMUM | | FIRST END SPLINE QUANTITY | 10 | | FIRST END STYLE | SPLINED (STRAIGHT) | | LARGEST STEP DIAMETER | 0.732 INCHES MINIMUM AND 0.736 INCHES MAXIMUM | | OVERALL LENGTH | 3.209 INCHES MINIMUM AND 3.259 INCHES MAXIMUM | | MATERIAL | STEEL | | SPECIAL FEATURES | 2ND END CHAMFER 43.0 DEG MIN,47.0 DEG MAX | | PURCHASE DESCRIPTION IDENTIFICATION | 77200-102-1416-01 | | SECOND END DIAMETER | 0.6450 INCHES MINIMUM AND 0.6500 INCHES MAXIMUM | | SECOND END SPLINE QUANTITY | 12 | | SECOND END STYLE | SPLINED (STRAIGHT) | | SECOND END SPLINE LENGTH | 0.6790 INCHES MINIMUM AND 0.7790 INCHES MAXIMUM | | STEP QUANTITY | 7 |
|
|