|
|
|
National Stock Number:
3040-01-035-9245
Federal Supply Class:
3040
National Item Identification Number:
010359245
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 61353 | 59211 | PARKER-HANNIFIN CORPORATION | | 61353 | 93835 | PARKER-HANNIFIN CORP |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.2650 INCHES NOMINAL | | FIRST END SPLINE LENGTH | 0.870 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 1.2650 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 1.0900 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 24 | | FIRST END STYLE | SPLINED (STRAIGHT) | | LARGEST STEP DIAMETER | 1.355 INCHES NOMINAL | | OVERALL LENGTH | 2.829 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | SECOND END GROOVE DIAMETER | 0.5100 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.0550 INCHES NOMINAL | | SECOND END DIAMETER | 0.7470 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.065 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 0.6040 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 11 | | SECOND END STYLE | CIRCULAR GROOVED AND SPLINED (STRAIGHT) | | SECOND END SPLINE LENGTH | 0.870 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.7470 INCHES NOMINAL | | STEP QUANTITY | 3 |
|
|