|
|
|
National Stock Number:
3040-01-033-7095
Federal Supply Class:
3040
National Item Identification Number:
010337095
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 051580 | 34228 | L3 TECHNOLOGIES, INC. | | 887B051580 | 03956 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 887B051580 | 34228 | L3 TECHNOLOGIES, INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.1850 INCHES MINIMUM AND 0.1860 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.247 INCHES MINIMUM AND 0.252 INCHES MAXIMUM | | OVERALL LENGTH | 98.875 INCHES MINIMUM AND 99.125 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 303 | | SECOND END DIAMETER | 0.2470 INCHES MINIMUM AND 0.2520 INCHES MAXIMUM | | SECOND END STYLE | PLAIN | | STEP QUANTITY | 2 | | SURFACE FINISH | 125.0 MICROINCHES |
|
|