|
|
|
National Stock Number:
3040-01-026-4015
Federal Supply Class:
3040
National Item Identification Number:
010264015
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 234762 | 12603 | CLARK EQUIPMENT CO | | 234762 | 77237 | DANA OFF HIGHWAY PRODUCTS, LLC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 2.50000 INCHES NOMINAL | | FIRST END PITCH DIAMETER | 2.3750 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 2.875 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 2.4985 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 2.2210 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 19 | | FIRST END STYLE | SPLINED (INVOLUTE) | | LARGEST STEP DIAMETER | 3.250 INCHES NOMINAL | | OVERALL LENGTH | 15.875 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END DIAMETER | 2.7500 INCHES NOMINAL | | SECOND END SPLINE LENGTH | 2.875 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 2.7485 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 2.4710 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 21 | | SECOND END STYLE | SPLINED (INVOLUTE) | | SECOND END PITCH DIAMETER | 2.6250 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | STEP QUANTITY | 7 |
|
|