|
|
|
National Stock Number:
3040-01-024-1001
Federal Supply Class:
3040
National Item Identification Number:
010241001
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 9L6807 | 11083 | CATERPILLAR INC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.3530 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.2140 INCHES NOMINAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.287 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.3350 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED | | OVERALL LENGTH | 7.756 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | SECOND END DIAMETER | 0.3530 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.2140 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.2140 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.609 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED | | SPECIAL FEATURES | BOTH ENDS ROUNDED TO 0.500 IN. RADIUS; CENTERS FLATTED 0.157 IN. DIA; SLOT 0.186 IN. W,0.064 IN. DEEP LOCATED 3.197 IN. FROM FIRST END | | SURFACE FINISH | 10.0 MICROINCHES |
|
|