|
|
|
National Stock Number:
3040-01-023-6587
Federal Supply Class:
3040
National Item Identification Number:
010236587
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 37C301569P101 | 99207 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| CRITICALITY CODE JUSTIFICATION | AMDL AND AMFZ | | END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.2686 INCHES MINIMUM AND 0.2689 INCHES MAXIMUM | | FIRST END HOLE DEPTH | 0.269 INCHES NOMINAL | | FIRST END HOLE DIAMETER | 0.0620 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM | | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM | | FIRST END STYLE | UNTHREADED CROSS DRILLED | | OVERALL LENGTH | 1.460 INCHES MINIMUM AND 1.480 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING | | SECOND END DIAMETER | 0.2686 INCHES MINIMUM AND 0.2689 INCHES MAXIMUM | | SECOND END HOLE DIAMETER | 0.0938 INCHES MINIMUM AND 0.0943 INCHES MAXIMUM | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.190 INCHES NOMINAL | | SECOND END STYLE | TONGUE AND CROSS DRILLED HOLE | | SECOND END TONGUE THICKNESS | 0.122 INCHES MINIMUM AND 0.124 INCHES MAXIMUM | | SECOND END TONGUE WIDTH | 0.230 INCHES NOMINAL | | SECOND END STEP LENGTH | 1.310 INCHES NOMINAL | | SURFACE FINISH | 8.0 MICROINCHES |
|
|