|
|
|
National Stock Number:
3040-01-022-8773
Federal Supply Class:
3040
National Item Identification Number:
010228773
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 357950110962 | 86329 | PARKER-HANNIFIN CORP |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.4050 INCHES NOMINAL | | FIRST END KEYWAY WIDTH | 0.1240 INCHES NOMINAL | | FIRST END DISTANCE FROM KEYWAY CENTER TO END | 0.124 INCHES NOMINAL | | FIRST END EXTERNAL KEYWAY LENGTH | 0.213 INCHES NOMINAL | | FIRST END STYLE | WOODRUFF KEYWAY | | FSC APPLICATION DATA | PUMP SCAVENGE | | LARGEST STEP DIAMETER | 0.498 INCHES NOMINAL | | OVERALL LENGTH | 5.482 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END DIAMETER | 0.4030 INCHES NOMINAL | | SECOND END STYLE | SPLINED (INVOLUTE) | | SECOND END PITCH DIAMETER | 0.3500 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 0.410 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.4030 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 0.3080 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 15 | | STEP QUANTITY | 3 | | SURFACE FINISH | 125.0 MICROINCHES |
|
|