|
|
|
National Stock Number:
3040-01-022-6239
Federal Supply Class:
3040
National Item Identification Number:
010226239
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 55-22056-15 | 52081 | EURAMCO SAFETY INC | | 956113 | 0UBG9 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 956113 | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 956113-00 | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | KMC-RX156113 | 30828 | KROBACH MFG. CORP. | | RX-156113 | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | RX156113-1 | 0UBG9 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | RX156113-1 | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | SK188765PC3 | 0UBG9 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | SK188765PC3 | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END EXTERNAL THREAD LENGTH | 1.000 INCHES NOMINAL | | FIRST END DIAMETER | 1.2500 INCHES NOMINAL | | FIRST END STYLE | EXTERNAL THREADED | | LARGEST STEP DIAMETER | 2.998 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-281 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | NICKEL ALLOY | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 44.125 INCHES NOMINAL | | SECOND END DIAMETER | 2.1570 INCHES NOMINAL | | SECOND END EXTERNAL THREAD LENGTH | 0.562 INCHES NOMINAL | | SECOND END STYLE | EXTERNAL THREADED | | SPECIAL FEATURES | KEYWAY IN SECOND END 0.312 IN. W X 0.125 IN. DEEP | | STEP QUANTITY | 15 | | SURFACE FINISH | 32.0 MICROINCHES |
|
|