|
|
|
National Stock Number:
3040-01-021-6646
Federal Supply Class:
3040
National Item Identification Number:
010216646
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 1628321 | 99251 | MISSION SYSTEMS DAVENPORT INC. | | 1628321-1 | 99251 | MISSION SYSTEMS DAVENPORT INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.1550 INCHES NOMINAL | | FIRST END FLAT LENGTH | 0.343 INCHES NOMINAL | | FIRST END STYLE | FLATTED | | LARGEST STEP DIAMETER | 0.250 INCHES NOMINAL | | OVERALL LENGTH | 1.531 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,COND T FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 416 | | SECOND END DIAMETER | 0.1600 INCHES NOMINAL | | SECOND END FLAT LENGTH | 0.250 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.1080 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.0600 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.690 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED AND FLATTED | | STEP QUANTITY | 3 |
|
|