|
|
|
National Stock Number:
3040-01-016-3041
Federal Supply Class:
3040
National Item Identification Number:
010163041
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 612-054-001 | 26055 | PARKER-HANNIFIN CORPORATION |
|
Techincal Specification:
| ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 135.0 | | BORE DIAMETER | 0.0780 INCHES MINIMUM AND 0.0790 INCHES MAXIMUM | | LARGEST DIAMETER LENGTH | 0.125 INCHES NOMINAL | | OUTSIDE DIAMETER | 0.250 INCHES NOMINAL | | NOMINAL THREAD SIZE AND LOCATION | 0.086 INCHES 1ST HOLE | | SMALL END DIAMETER | 0.093 INCHES NOMINAL | | SCREW THREAD SERIES DESIGNATOR AND LOCATION | 1ST HOLE UNC | | SECURING HOLE QUANTITY | 2 | | SECURING HOLE TYPE AND LOCATION | THREADED 1ST HOLE | | STYLE DESIGNATOR | ROUND STEPPED | | SURFACE FINISH AND LOCATION | 125 MICROINCHES OVERALL | | SURFACE TREATMENT | PASSIVATE | | THICKNESS | 0.212 INCHES NOMINAL |
|
|