|
|
|
National Stock Number:
3040-01-013-6511
Federal Supply Class:
3040
National Item Identification Number:
010136511
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 716539-2 | 45934 | ONTIC ENGINEERING & MANUFACTURING, INC | | 716539-2 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| CRITICALITY CODE JUSTIFICATION | FEAT | | END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.067 INCHES NOMINAL | | FIRST END DIAMETER | 0.1830 INCHES NOMINAL | | FIRST END HOLE DEPTH | 0.183 INCHES NOMINAL | | FIRST END HOLE DIAMETER | 0.0500 INCHES NOMINAL | | FIRST END STYLE | UNTHREADED CROSS DRILLED | | FSC APPLICATION DATA | ENGINE FUEL SYSTEM ACFT | | LARGEST STEP DIAMETER | 0.215 INCHES NOMINAL | | OVERALL LENGTH | 2.210 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.067 INCHES NOMINAL | | SECOND END DIAMETER | 0.1240 INCHES NOMINAL | | SECOND END STYLE | UNTHREADED CROSS DRILLED | | SECOND END HOLE DEPTH | 0.124 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.0540 INCHES NOMINAL | | SPECIAL FEATURES | FLIGHT SAFETY CRITICAL | | STEP QUANTITY | 5 | | SURFACE FINISH | 125.0 MICROINCHES |
|
|