|
|
|
National Stock Number:
3040-01-011-7288
Federal Supply Class:
3040
National Item Identification Number:
010117288
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 035-27097 | 9F512 | PARKER-HANNIFIN CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.156 INCHES NOMINAL | | FIRST END DIAMETER | 0.2500 INCHES NOMINAL | | FIRST END HOLE DEPTH | 0.250 INCHES NOMINAL | | FIRST END HOLE DIAMETER | 0.0630 INCHES NOMINAL | | FIRST END STYLE | UNTHREADED CROSS DRILLED | | LARGEST STEP DIAMETER | 0.375 INCHES NOMINAL | | OVERALL LENGTH | 1.250 INCHES NOMINAL | | MATERIAL | STEEL | | SPECIAL FEATURES | 1.015 IN. BETWEEN GROOVES; ANGLE BETWEEN HOLES 23.5 DEG | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.109 INCHES NOMINAL | | SECOND END DIAMETER | 0.2500 INCHES NOMINAL | | SECOND END STYLE | UNTHREADED CROSS DRILLED | | SECOND END HOLE DEPTH | 0.250 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.0630 INCHES NOMINAL | | STEP QUANTITY | 5 |
|
|