|
|
|
National Stock Number:
3040-01-003-8040
Federal Supply Class:
3040
National Item Identification Number:
010038040
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 3500302-1 | 59364 | HONEYWELL INTERNATIONAL INC. | | 3500302-1 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.0820 INCHES NOMINAL | | FIRST END PITCH DIAMETER | 1.0280 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 1.110 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 1.0820 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 0.9830 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 25 | | FIRST END STYLE | SPLINED (INVOLUTE) | | FSC APPLICATION DATA | STARTER ENGINE AIR TURBINE | | LARGEST STEP DIAMETER | 1.354 INCHES NOMINAL | | OVERALL LENGTH | 4.130 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END DIAMETER | 1.2480 INCHES NOMINAL | | SECOND END STYLE | SPLINED (INVOLUTE) | | SECOND END PITCH DIAMETER | 1.1670 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 1.220 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 1.2480 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 1.0860 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 25 | | STEP QUANTITY | 3 | | SURFACE FINISH | 32.0 MICROINCHES |
|
|