|
|
|
National Stock Number:
3040-00-999-9799
Federal Supply Class:
3040
National Item Identification Number:
009999799
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 13200E0669 | 97403 | CECOM LR CENTER | | X55082 | 66717 | WURLITZER CO THE |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END HOLE DEPTH | 1.000 INCHES NOMINAL | | FIRST END HOLE DIAMETER | 0.2700 INCHES NOMINAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.562 INCHES NOMINAL | | FIRST END STYLE | UNTHREADED CROSS DRILLED | | LARGEST STEP DIAMETER | 1.495 INCHES MINIMUM AND 1.500 INCHES MAXIMUM | | OVERALL LENGTH | 14.406 INCHES NOMINAL | | MATERIAL | PLASTIC POLYAMIDE | | SECOND END HOLE DEPTH | 1.000 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.27000 INCHES NOMINAL | | SECOND END DIAMETER | 1.0000 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.250 INCHES NOMINAL | | SECOND END STYLE | UNTHREADED CROSS DRILLED | | STEP QUANTITY | 4 | | SURFACE FINISH | 32.0 MICROINCHES |
|
|