6105-00-997-1686 MOTOR,ALTERNATING CURRENT Index 3110-00-997-1696 PUCK,REEL DRIVE

National Stock Number:
3040-00-997-1690

Federal Supply Class:
3040

National Item Identification Number:
009971690

Description:
SHAFT,SHOULDERED

Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.


Manufacturer Information:
C1372009269OMEX
C1372054089DRS C3 & AVIATION COMPANY


Techincal Specification:
END SIMILARITYNOT IDENTICAL
FIRST END DIAMETER0.4530 INCHES NOMINAL
FIRST END STYLEPLAIN
LARGEST STEP DIAMETER0.453 INCHES NOMINAL
OVERALL LENGTH2.920 INCHES NOMINAL
MATERIALSTEEL COMP 303
SECOND END DIAMETER0.2498 INCHES NOMINAL
SECOND END GROOVE DIAMETER0.2280 INCHES MINIMUM AND 0.2310 INCHES MAXIMUM
SECOND END GROOVE WIDTH0.0400 INCHES MINIMUM AND 0.0430 INCHES MAXIMUM
SECOND END DISTANCE BETWEEN FIRST AND SECOND GROOVE CENTERS0.355 INCHES NOMINAL
SECOND END DISTANCE FROM END TO GROOVE0.059 INCHES NOMINAL
SECOND END STYLETWO CIRCULAR GROOVES
SPECIAL FEATURESFIRST END SIX NOTCHES RADIALLY SPACED AT 60 DEG,0.453 IN. NOTCH MJR DIA,0.281 IN. NOTCH MIN DIA,0.200 IN. NOTCH LG;FIRST END BORE,0.281 IN. BORE DIA,0.125 IN. BORE DP;SECOND END UNTHD CROSS DRILLED THRU HOL,0.630 IN. HOLE DIA,0.435 IN. DISTANCE FROM HOLE C TO END
STEP QUANTITY6
SURFACE FINISH32.0 MICROINCHES


Click here to Register for Free 30-day Trial